Aggregates

STANDARDS: ASTM D6928, D7428 | AASHTO T237 | TEXAS 845-49-40 | ONTARIO LS-618 Used to determine the abrasion resistance and durability of mineral aggregates. An…

For an accurate, fast and easy determination of moisture content in sand, fine and coarse aggregates up to 25 mm diameter. By using the latest…

STANDARDS: EN 12697-1 clause C, EN 13108 Designed for high temperature heatings. Structure composed of in sheet-steel, frontal furnace in diecasted steel to avoid the…

This furnace is also suitable for the “Determination of resistance to thermal shock of aggregates according to EN 1367-5 Specification”. Max. temperature: 1100 °C Chamber…

STANDARDS: EN 196-2, 196-21, 459-2 Used to determine the loss on ignition of cement and lime; chloride, carbon dioxide, alkali content of cement. Max. temperature:…

For a rapid and accurate determination of moisture content in sand, gravel, aggregates, soil etc, based on the calcium carbide method. It is possible to…

STANDARDS: ASTM C70 AASHTO T142 Used for field determination of the amount of surface moisture in fine aggregates. Graduated to 200 ml between the two…

Standards: ASTM C289 | NF P94-048 | UNI 85209-22 UNI 8520-22 Used for the chemical determination of the potential reactivity of aggregates with alkalies in…

For the sieve shakers A059 serie and A060-01, lined internally with sound-proofing material for noise reduction in compliance with CE Directive.

Designed for tests on site or yard laboratory analysis when electricity is not available. By rotating the crank, the shaker applies a vertical and rotational…

STANDARD: EN 933-10 The Air Jet Machine is suitable for sieving powder and drying grain products in order to obtain sieving results between 5 to…

It accepts sieves having diameter 200 – 250 – 300 – 315 mm, and 8”…12”. This simple and low cost Sieve Shaker is activated by…

STANDARDS: EN 932-5 | ISO 3310-1 Designed for sieving considerable quantities of any material. The screen shaker accepts up to 30 litres (from 60 to…

STANDARD: BS 812:105.1 Suitable to verify if aggregate is flaky; i.e. if its thickness is less than 0.6 of its nominal size. Constructed of heavy…

STANDARDS: ASTM C1252 | AASHTO TP33 Used to determine the uncompacted void content of a fine aggregate sample. Indicates the angularity, spherically, and workability of…

Used to measure the efflux index of fine aggregates (shape and angularity). The efflux index of an aggregate is the required time in seconds of…