Products

STANDARDS: ASTM C70 AASHTO T142 Used for field determination of the amount of surface moisture in fine aggregates. Graduated to 200 ml between the two…

Standards: ASTM C289 | NF P94-048 | UNI 85209-22 UNI 8520-22 Used for the chemical determination of the potential reactivity of aggregates with alkalies in…

For the sieve shakers A059 serie and A060-01, lined internally with sound-proofing material for noise reduction in compliance with CE Directive.

Designed for tests on site or yard laboratory analysis when electricity is not available. By rotating the crank, the shaker applies a vertical and rotational…

STANDARD: EN 933-10 The Air Jet Machine is suitable for sieving powder and drying grain products in order to obtain sieving results between 5 to…

It accepts sieves having diameter 200 – 250 – 300 – 315 mm, and 8”…12”. This simple and low cost Sieve Shaker is activated by…

STANDARDS: EN 932-5 | ISO 3310-1 Designed for sieving considerable quantities of any material. The screen shaker accepts up to 30 litres (from 60 to…

STANDARD: BS 812:105.1 Suitable to verify if aggregate is flaky; i.e. if its thickness is less than 0.6 of its nominal size. Constructed of heavy…

STANDARDS: ASTM C1252 | AASHTO TP33 Used to determine the uncompacted void content of a fine aggregate sample. Indicates the angularity, spherically, and workability of…

Used to measure the efflux index of fine aggregates (shape and angularity). The efflux index of an aggregate is the required time in seconds of…

DETERMINATION OF RESISTANCE TO FRAGMENTATION STANDARDS: EN1097-2 | ASTM C131 | UNI 8520-19 | EN 12697-17 | EN 12697-43 | NF P18-573 | AASHTO T96…

DETERMINATION OF THE RESISTANCE TO WEAR STANDARDS: EN1097-1 | EN 13450 | NF P18-572 NF P18-576 | UNE 83115 | CNR N° 109 Used to…

STANDARDS: NF P18-577 | ASTM D2-33 Used to determine the quality of aggregates to abrasion both by dry and wet procedure. The machine essentially comprises…

DIAMETER 150 MM STANDARD: comparable to BS 812:110 Comprising 150 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 115 mm diameter…

STANDARD: BS 812 – part 2 Used to determine the moisture content at known conditions. Supplied complete with measuring cylinder, rubber pipes fitted with screw…