Shop

STANDARDS: ASTM C40-11 Method D | AASHTO T21 | UNI 8020-14 For the determination of organic impurities in soils and fine aggregates. Chart with 5…

STANDARD: CNR N°4 Composed of a metallic guide 500 mm long and 140 mm wide, suitable to contain 500 gr. of testing aggregates. The guide…

STANDARDS: EN 1997-2 | BS 1377:2 Used to determine the specific gravity of soils, it rotates two gas jars at approx. 50 rpm to satisfy…

CARBONATE CONTENT OF AGGREGATES Used for the determination of calcium carbonate (CaCo3) in certain products such as limestone and lime marl. It mainly consists of…

ABRASION RESISTANCE OF NATURAL STONES AND CONCRETE TILES FOR PAVING STANDARDS: EN 1338, 1339, 1340, 1341, 1342, 1343 | EN 14157 CEN ISO-TC 178 |…

AGGREGATE ABRASION VALUE (AAV) DETERMINATION STANDARDS: EN 1097-8 | Comparable to BS 812-113 The test measures the resistance of aggregates to surface wear by abrasion.…

STANDARDS: EN 1338:2004 | EN 1339, 1340, 13892-3 EN 14157 | EN 13748-2 | DIN 52108 Used to measure volume loss in a specimen under…

DETERMINATION OF THE POLISHED STONE VALUE STANDARDS: EN 1097-8, EN 1341, 1342, 1343 | BS 812:114 | NF P18-575 | CNR N.105 MAIN FEATURES Up…

STANDARDS: EN 1097-8 | EN 1338, 1341, 1342, | EN 13036-4 | EN 1436 | BS 7976 | ASTM E303 (model A113-01) The tester measures…

Designed to mix dry materials like: powders, cement, gypsum and granulometric materials. In a short time it assures a perfect and homogeneous mixture. The mixer…

CAPACITY 300 G | 1000 G Designed to reduce from 5 mm to powder granulometric materials like: cement, stones, rocks, hard materials. Supplied without jar…

STANDARDS: ASTM C289 | UNE 83 120 Comparable to EN 933-3, EN 933-6 Designed to crush any sort of material, also the hardest. The structure…

STANDARDS: BS 812:2, 1377:2 | ASTM D 854 AASHTO T100 | EN 1097-6 S147 PYKNOMETER, glass made, with aluminium cone and rubber seal. Capacity: 1…

STANDARDS: EN 12390-7 | EN 1097-6 | UNI 6394-2 | BS 812, 1881:14 | ASTM C127, C128 | AASHTO T84 | DIN 12039 | NLT…

STANDARD: BS 812 Used to measure coarse aggregate density through water displacement method. Formed by a cylindric metal container Ø 150×350 mm fitted with a…

DIAMETER 150 MM STANDARD: comparable to BS 812:110 Comprising 150 mm nominal diameter steel cylinder, plunger, base plate, tamping rod and measure 115 mm diameter…