Shop

The instrument measures the roughness coefficient of a rock specimen or of a joint. The sample is usually a rock core cut in half lengthwise,…

STANDARD: UNI 10766 Extract a micro-core samples from a rock is an extremely valid non-destructive method, as it allows analysis and accurate evaluations (compression resistance,…

STANDARD: ASTM D4644 This equipment has been developed to assess the durability of rock to weakening and disintegration when subjected to the simulated effects of…

STANDARDS: EN 12390-2 | ASTM D4543 Designed to grind and polish cubic and cylindrical specimens of concrete, rocks, natural stones etc. having 380 mm. as…

LOW IMPACT ENERGY MODEL STANDARDS: ASTM D5873 | ISRM This impact hammer is used for rock classification test. The core rock specimen normally NX 54.7…

Used for the preparation of rock and metallurgical specimens from lapping to final polishing. The disc is 200 mm diameter and the rotation speed is…

STANDARDS: ASTM D5731 | ISRM MAIN FEATURES High precision electric load cell. Capacity 56 kN. Core specimens up to 4″ (101.6 mm). Easy reading of…

STANDARDS: EN 154 | EN ISO 10545-7 Suitable to determine the abrasion resistance of glazed tiles and other materials. The instrument has three stations, and…

Used for the evaluation of the surface roughness of rock samples. This simple device allows very thin steel wires to perfectly lay to the outline…

STANDARD: EN 101 Used for determining the hardness of the surface of the materials. Composed by a case containing 9 minerals of the Moh’s hardness…

A023-01N MUFFLE FURNACE 1100 °C HIGH CAPACITY STANDARD: EN 1367-5 Used for the determination of resistance to thermal shock of aggregates subject to heating and…

STANDARD: UNI 8520-22 A101 PRISM MOULD, 25x25x280 mm, three gangs, complete with six steel inserts to determine the dimensional variations of the specimen. Steel made,…

STANDARD: UNI 11604 A101N PRISM MOULD ONE GANG, 75x75x285 mm, complete with inserts and handles to determine the dimensional variations of the specimen. Steel made,…

TESTS OF THERMAL AND WEATHERING PROPERTIES STANDARDS: EN 1367-4 | BS 812:102 A107 PRISM MOULD 50x50x200 mm, three gangs, complete with steel inserts, to determine…

STANDARDS: EN 1367-1 | CNR N° 80 | UNI 8520-20 BS 812:124 | ASTM C671, C682 C316N CLIMATIC CHAMBER, 535 LITRES CAPACITY Temperature range -30…

DETERMINATION OF RESISTANCE TO FREEZING AND THAWING STANDARDS: EN 1367-1 | EN 932-5 It provides the needed informations on aggregates subject to freeze and thaw…