Electrical devices for automatic readings. Calibration certificate is
supplied. Cable, connector and signal conditioner are provided.
TYPES OF AVAILABLE TRANSDUCERS:
TYPE “A”: Accurate and versatile linear potentiometric displacement
Indipendent linearity < 0.3% (0.3×10 mm)
Max. displacement speed: up to 10 m/s.
S336-11 10 mm travel
S336-12 25 mm travel
S336-14 50 mm travel
S336-13 100 mm travel
TYPE “B”: Linear Strain Gauge Transducer. It guarantees good
repeatability and noise reduction.
Full bridge at 350 Ohm
Indipendent linearity < 0.1%
Standard sensitivity: 2 mV/V
S336-18 5 mm travel
S336-15 10 mm travel
S336-16 25 mm travel
S336-17 50 mm travel
ACCESSORIES for DISPLACEMENT TRANSDUCERS
S336-30 Extension cable 2 metres long
S336-31 Extension cable 5 metres long
S336-32 Extension cable 10 metres long
Note: It is recommended to use not more than 10 m of extension
cable to avoid noise problems that might occur.
S335-15 Universal coupling pliers to hold the transducer/dial
gauge. It fits all Matest displacement transducers and
dial gauges (from Ø 8 mm to 20 mm).
S305-05 Mounting device of the universal coupling pliers mod.
S335-15 to fix the displacement transducer/dial gauge
to the Triaxial Cell mod. S305 or mod. S306
The displacement transducers must be connected to the
automatic data acquisition system mod. S334
(see p. 559) or mod. S301-05 (see p. 544).
GAUGE BLOCKS. Grade 1
Used to calibrate the linear displacement transducers.
S336-41 Nominal length 5 mm
S336-43 Nominal length 10 mm
S336-45 Nominal length 25 mm
S336-47 Nominal length 50 mm