STANDARDS: EN 196-1, EN 13286-41, EN 933-5, EN 1015-11 | ISO 679 | ASTM C109, C348, C349, C1194 | DIN 1164 | BS 4550 | GOST 26798-1
For a further improvement of energy efficiency and silent operation, (optional device code C099N).Technical details, p. 223
This testing machine of high performance, advanced solutions and top quality components is equipped with two load chambers with two independent
measuring ranges. It is suitable to perform:
– Flexural tests on cement prisms 40.1x40x160 mm (with the range 0 – 15 kN)
– Compression tests on portions of prism 40.1x40x160 mm broken in flexure, cubes side 40, 50, 70, 100 mm 2”, cores with max. height of
180 mm (with the range 0 – 300 kN) by using the suitable compression devices described in next pages (accessories E170 – E172-02)
The applied load is measured by two strain gage load cells (15kN and 300 kN) at high accuracy.
This solution eliminates the weights of the piston and lower compression platen, packing set frictions etc., granting very high accuracy (max. error
within ± 0,5%). The load chamber 0 – 15 kN permits very accurate tests on specimens having low strength (both in compression and in flexure).
Equipped with an electric microswitch to stop the piston after thespecimen breakage, in order to avoid damages to the compression or
MAIN FEATURES FOR ALL MODELS
Max. vertical daylight between platens: 189 mm
Horizontal daylight between columns: 210 mm
Platens diameter: 165 mm
Ram travel: 35 mm approx.
Accuracy: Class 1 starting from 10% of the scale for
both the ranges.
Safety guards to CE Directive, polycarbonate made,
Supplied complete with lower compression platens
and coupling pieces to easily fix the compression
devices (see accessories).
Dimensions of the frame: 1300x400xh1500 mm
Power supply: 230V 1ph 50Hz 750W
Weight: 400 kg
Note: range 0-15 kN can be increased on request up to 25 kN.
ACCESSORIES FOR DUAL CHAMBER MACHINES
E172-01 FLEXURE DEVICE for 40.1x40x160 mm mortar specimens.
EN 1015-11, EN 196-1, EN/ISO 679 See p. 428
E172-02 FLEXURE DEVICE for 40x40x160 mm mortar specimens.
ASTM C348. See p. 428
E170 COMPRESSION DEVICE for portions of prism
40.1x 40×160 mm broken in flexure.
EN 196, EN/ISO 679, ASTM C349. See p. 428
E171 COMPRESSION DEVICE for cubes 50 mm and 2” side.
ASTM C109, C1194. See p. 428
E171-01 COMPRESSION DEVICE for cubes 70.7 mm side.
BS 4550. See p. 428
Note: other models of flexure and compression devices with
accessories are listed at p. 428
E161-05 DISTANCE PIECE, 50 mm high
E161-06 DISTANCE PIECE, 25 mm high
Note: the compression devices do not require any distance piece.
C127N GRAPHIC PRINTER on thermo-paper on board.
C127-11 THERMO-PAPER roll for printer (pack of 10 rolls)
E183-10 SAFETY GUARDS complete with stop switch.
C097-05 CLASS 1, starting from 1% of the full range. With a
special calibration procedure it is possible to grant
Class 1 practically on the full range of the machine.
H009-01 PERSONAL COMPUTER, LCD 22” monitor, keyboard,
mouse, cables. The supply of the PC includes the installation
of the software