Coring angle: 0 to 360°
The excursion group is rectified to assure a very soft and accurate
drilling movement. The excursion is 550 mm.
Electric motor at three speeds: 670, 1140, 1580 rpm with speed
reducer, provided of friction device and switch to CE Safety Directive.
The height of the vertical column is 1000 mm and is pre-built for
extension column connection (accessory mod. C322-01).
Power supply: 230V 1ph 50-60Hz 2200W
Dimensions: 440x750x1300 mm
Weight: 85 kg approx.
ACCESSORY
C322-01 EXTENSION COLUMN, 1000 mm long, to connect to
mod. C322 for drillings over 1 metre from the ground.
SPARE
C330 Electric motor, for C318N, C322 and C324N
Power 2200 Watt, three speeds 670 – 1140 – 1580 rpm.
Complete with friction device and connection to coolant
water supply. Double extremely safe isolation and switch
to CE Safety Directive. Connection to hub 1 1/4”.
Power supply: 230V 1ph 50-60Hz 2200W
Weight: 9 kg approx.
C344 Strap wrench useful for unblocking any type of bit.
C344-01 Strap wrench useful for unblocking only the bits with
backend screwed connector.
C345 Extension rod 300 mm. long (used for deep holes).
DIAMOND CORE DRILL BITS
WITH BACKEND SCREWED CONNECTOR
Designed for making holes and getting cores from hard materials, like
concrete, reinforced concrete, rocks, stones, bituminous materials.
The diamond utilized for these bits is quality impregnated sinterized
type.
The diamond segment is 9 mm high. The 9 mm high segment is
important for the bit life, because the diamond is about 85% of the
bit value.
The coupling between the bit and the motor shaft is direct through
the backend screwed connector.
This diamond bit model is suitable to drill both reinforced concrete
and also bituminous materials.