STANDARDS: EN 1367-1
Technical specifications:
Same as mod. C313N, except for the humidity control that is not
included.
ACCESSORIES
C313-11N ADDITIONAL BASKET SHELVE : Made of Stainless Steel
grid, suitable for loads up to 40 Kg.
C313-12N MOBILE TEMPERATURE PROBE: Type PT100 in stainless
steel bulb for free positioning in the chamber and
on the specimen.
C313-13N LOGGING FUNCTION: Logging upgrade function for
on-board Jumo controller with enabling of “real time
trend” and “Historical trend” of variables and predisposition
of PC interface.
C313-15N PC INTERFACE: Consist of Cables, PC interface converter
and Jumo software for editing
and real-time view.
ADHESIVES FOR TILES
DETERMINATION OF TENSILE ADHESION
STRENGTH FOR CEMENTITIOUS ADHESIVES
STANDARDS: EN 1348 | EN 12004
C313-05N
INTERNAL FLOODING SYSTEM
Applicable only to temperature and humidity
controlled cabinets C313N, C313-01N.
Used for the determination of tensile adhesion strength
for cementitious adhesives.
It is composed of two stainless steel vessels and a discharging
system for the water.
The system allows to empty and fill the inner vessel with water
without opening the climatic cabinet.
Inner vessel water level is limited by a sensor.
Filling and drainage of water are regulated by a valve positioned on
the bottom of both vessels.
Inner vessel volume is 150 l, while outer vessel volume is 170 l.
Water temperature range is from 10 °C to 40 °C, demineralized
water must be used.
Temperature stability: ± 2 °C
Water pressure range is from 0.2 to 5 bar.
Flooding system can be installed also in C313N already supplied if
returned in Matest factory.
System must work with no
organic compounds.
Outer vessel dimensions:
816x588x600 mm
Weight: 50 kg approx.
