MARSHALL STABILITY TEST
STANDARDS: EN 12697-34 | ASTM D 6926, D5581, D1559
AASHTO T245 | BS 598 :107 | NF P98-251-2
Test development with displacement control.
NEEDED ACCESSORIES
S337-34 Strain gauge load cell, 50 kN capacity.
S212-05 Loading piston.
B046N Stability mould Ø 4” aluminium made.
As alternative:
B046-03 Stability mould Ø 4” steel made ASTM D6927
B046-02 Stability mould Ø 6” steel made ASTM D5581
B043-01N Software for Marshall test.
SPLITTING TENSILE TEST
STANDARDS: EN 12697-23 | ASTM D6931 | AASHTO T283 | CNR 134
Test development with displacement control.
NEEDED ACCESSORIES
S337-34 Strain gauge load cell, 50 kN capacity.
S212-05 Loading piston.
B047-02 Splitting tensile device for samples Ø 4” and 6”
B047-04 Set of TWO displacement transducers with accessories.
B043-02N Software for Splitting Tensile test.
DIRECT SHEAR (LEUTNER) BETWEEN BITUMINOUS
STRATA
STANDARD: ALP A StB T.80
Direct shear test (LEUTNER) on the connection between bituminous
strata, carried out on asphalt cylinder specimens Ø 150 mm or
100 mm obtained from road cores or on laboratory made specimens.
Test development with displacement control.
NEEDED ACCESSORIES
S337-34 Strain gauge load cell, 50 kN capacity.
S212-05 Loading piston.
B047-10 LEUTNER testing head for specimens Ø 150 mm.
B047-11 Spacers for Ø 100 mm specimens with Leutner head.
B043-03N Software for Marshall and Leutner tests.
Note: Needed accessories listed above, are common for different tests. We recommend to check them when ordering, to avoid duplications.
Additional specific applications described at p. 500
