STANDARDS: ASTM D1194, D1195, D1196 | BS 1377:9 | CNR N° 92 and 146 | UNE 7391 | Comparable to DIN 18134
This test is performed for the determination of the bearing capacity of a soil in-situ on road constructions, foundations, road subgrades, airport
and highway pavements.
A wide range of plate bearing test equipment is available, together with many accessories according to the different Standards and specific
end-user needs.
The hand pumps 100 kN and 200 kN capacity are “Enerpac Made” and all models have double speed, ensuring fast approach.
AVAILABLE MODELS
S222 KIT
PLATE BEARING TEST EQUIPMENT
100 KN CAPACITY – 1 DIAL GAUGE MODEL
ANALOGUE MEASURING SYSTEM WITH DIAL MANOMETER
STANDARD: CNR N° 146, method “A”
Consisting of:
S222-01 Hydraulic jack 100 kN capacity, complete with hand
pump, rubber pipe with fast connector, set of extension
rods of different lengths, carrying case.
S222-02 Analogue pressure gauge 0-100 kN, div. 0.5 kN
S226-05 Load plate Ø 300 mm
S226-12 Device for centre dial gauge measure, with spherical
seat.
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium
made, adjustable in height, complete with base
supports, plumb and spirit level. Packed separayely.
S377 Dial gauge 25×0.01 mm
S226-16 Articulated dial gauge support with adjustment device.
Weight: 60 kg approx.
S222D KIT
PLATE BEARING TEST EQUIPMENT
100KN CAPACITY – 1 DIGITAL GAUGE MODEL
DIGITAL MEASURING SYSTEM WITH DIGITAL MANOMETER
Same composition of S222KIT except:
S222-02D Digital pressure manometer 0 – 100 kN
with 10N resolution, instead of the analogue gauge
S222-02.
S222-02D | S225-02D
DIGITAL PRESSURE MANOMETER
The applied load is measured by a high precision electric load cell
with digital display, granting accurate readings also at low loads.
– 65.000 divisions
– 10N resolution
– linearity: 0.05%
– hysteresis: 0.03%
– repeatability: 0.02%
– display: LCD with high visibility
– display height: 16 mm
– battery operated, 12 months life
ACCESSORY for S222 KIT and S223 KIT
S223-01 PRESSURE GAUGE, range 0 – 50 kN, div. 0.25 kN with
large dial Ø 200 mm, complete with fast connector,
used for accurate readings at low loads, as for ex.
pre-load of 0.5 kg/cmq.
S223 KIT
PLATE BEARING TEST EQUIPMENT 100 KN CAPACITY – 3 DIAL GAUGES MODEL
ANALOGUE MEASURING SYSTEM WITH DIAL MANOMETER
STANDARDS: CNR N° 146, method “B” | BS 1377:9
Consisting of:
S222-01 Hydraulic jack 100 kN capacity, complete with hand pump, rubber pipe with fast connector, set of extension rods of different lengths,
carrying case.
S222-02 Analogue pressure gauge 0-100 kN, div. 0.5 kN.
S226-13 Upper spherical seat.
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely.
(Alternative solutions: S223-03 “Y” measuring system, Swiss method. See p. 519).
S377 n° 3 dial gauges 25×0.01 mm
S226-16 n° 3 articulated dial gauge supports with adjustment device.
Weight: 60 kg approx.
PLATE BEARING TEST EQUIPMENT 100 KN CAPACITY – 3 DIAL GAUGES MODEL
DIGITAL MEASURING SYSTEM WITH DIGITAL MANOMETER
Same composition of S223KIT except:
S222-02D Digital pressure manometer 0 – 100 kN with 10N resolution, instead of the analogue gauge S222-02.
S225 KIT
PLATE BEARING TEST EQUIPMENT 200 KN CAPACITY – 3 DIAL GAUGES MODEL
ANALOGUE MEASURING SYSTEM WITH DIAL MANOMETER
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) dia. 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Consisting of:
S225-01 Hydraulic jack 200 kN capacity, complete with hand pump, rubber pipe with fast connector, set of extension rods of different lengths,
carrying case.
S225-02 Analogue pressure gauge 0-200 kN, div. 1 kN.
S226-13 Upper spherical seat.
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solutions: S223-03 “Y” measuring system, Swiss method. See p. 519).
S377 n° 3 dial gauges 25×0.01 mm
S226-16 n° 3 articulated dial gauge supports with adjustment device.
Weight: 70 kg approx.
S225D KIT
PLATE BEARING TEST EQUIPMENT
200 KN CAPACITY – 3 DIAL GAUGES MODEL
DIGITAL MEASURING SYSTEM WITH DIGITAL MANOMETER
Same composition of S225KIT except:
S225-02D Digital pressure manometer 0 – 200 kN with 10N
resolution, instead of the analogue gauge S225-02.
ACCESSORY for S225 KIT
S223-02 PRESSURE GAUGE, range 0 – 50 kN, div. 0.25 kN with
large dial Ø 200 mm, complete with fast connector,
used for accurate readings at low loads, as for ex.
pre-load of 0.5 kg/cmq.
B103-10
BEARING PLATE 600 MM Ø CAST ALUMINIUM
STANDARD: NF P94-117-1
Used to determine the static deformation of flexible road pavement
and with the plate bearing equipment.
Technical details: see p. 167
S226 KIT
PLATE BEARING TEST EQUIPMENT 500 KN CAPACITY – 3 DIAL GAUGES MODEL
ANALOGUE MEASURING SYSTEM WITH DIAL MANOMETER
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) Ø 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Consisting of:
S227-02 Hydraulic jack 500 kN capacity, complete with hand pump, spherical seat, rubber pipe with fast connector, set of extension rods of
different lengths, carrying case.
S227-03 Analogue pressure gauge 0-500 kN, div. 2 kN.
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solutions: S223-03 “Y” measuring system, Swiss method. See p. 519).
S377 n° 3 dial gauges 25×0.01 mm
S226-16 n° 3 articulated dial gauge supports with adjustment device.
Weight: 110 kg approx.
S226D KIT
PLATE BEARING TEST EQUIPMENT 500 KN CAPACITY – 3 DIAL GAUGES MODEL
DIGITAL MEASURING SYSTEM WITH DIGITAL MANOMETER
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) Ø 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Same composition of S226 KIT except for:
S227-03D Digital pressure manometer 0 – 500 kN with 20N resolution, instead of the analogue gauge S227-03.
S224 KIT
DIGITAL PLATE BEARING TEST EQUIPMENT 100 KN CAPACITY
3 LINEAR DISPLACEMENT TRANSDUCERS AND CYBER-PLUS DATA ACQUISITION SYSTEM
STANDARDS: CNR N° 146, method “B” | BS 1377:9
Consisting of:
S222-01 Hydraulic jack 100 kN capacity, complete with hand pump, rubber pipe with fast connector, set of extension rods of different
lengths, carrying case.
S226-13 Upper spherical seat.
C116-09S Pressure transducer, connected to the pump.
C405-15N Cyber-Plus Evolution “Touch Screen” for data acquisition, visualization, processing and storing, directly connected to PC or printer.
Technical details: see p. 520
S224-21N Software for test data processing.
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solutions: S223-03 “Y” measuring system, Swiss method. See p. 519).
S336-14 n° 3 linear displacement transducers, 50 mm travel.
S336-31 n° 3 Extension cables for transducer, 5 m long.
S226-16 n° 3 articulated transducer supports with adjustment device.
S335-15 n° 3 universal coupling pliers for transducers.
Weight: 60 kg approx.
S224-01 KIT
DIGITAL PLATE BEARING TEST EQUIPMENT 200 KN CAPACITY
3 LINEAR DISPLACEMENT TRANSDUCERS AND CYBER-PLUS DATA ACQUISITION SYSTEM
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) Ø 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Consisting of:
S225-01 Hydraulic jack 200 kN capacity, complete with hand pump, rubber pipe with fast connector, set of extension rods of different
lengths, carrying case.
S226-13 Upper spherical seat.
C116-09S Pressure transducer, connected to the pump.
C405-15N Cyber-Plus Evolution “Touch Screen” for data acquisition, visualization, processing and storing, directly connected to PC or printer.
Technical details: see p. 520
S224-21N Software for test data processing.
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solutions: S223-03 “Y” measuring system, Swiss method. See p. 519).
S336-14 n° 3 linear displacement transducers, 50 mm travel.
S336-31 n° 3 Extension cables for transducer, 5 m long.
S226-16 n° 3 articulated transducer supports with adjustment device.
S335-15 n° 3 universal coupling pliers for transducers.
Weight: 70 kg approx.
S224-02 KIT
DIGITAL PLATE BEARING TEST EQUIPMENT 500 KN CAPACITY
3 LINEAR DISPLACEMENT TRANSDUCERS AND CYBER-PLUS DATA ACQUISITION SYSTEM
STANDARDS: CNR N° 146, method “B” | BS 1377:9, and using loading plates (accessory) Ø 450, 600, 760 mm, it meets also:
ASTM D1195, D1196 | CNR N. 92
Consisting of:
S227-02 Hydraulic jack 500 kN capacity, complete with hand pump, spherical seat, rubber pipe with fast connector, set of extension rods of
different lengths, carrying case.
C116-09S Pressure transducer, connected to the pump.
C405-15N Cyber-Plus 8 Evolution “Touch Screen” for data acquisition, visualization, processing and storing, directly connected to PC or printer.
Technical details: see p. 520
S224-21N Software for test data processing
S226-05 Load plate Ø 300 mm
S226-06 Intermediate plate Ø 160 mm
S222-03 Datum bar assembly, 2.5 m long, telescopic, aluminium made, adjustable in height, complete with base supports, plumb and spirit
level. Packed separayely. (Alternative solution: S223-03 “Y” measuring system, Swiss method).
S336-14 n° 3 linear displacement transducers, 50 mm travel.
S336-31 n° 3 Extension cables for transducer, 5 m long.
S226-16 n° 3 articulated transducer supports with adjustment device.
S335-15 n° 3 universal coupling pliers for transducers.
Weight: 110 kg approx.
ACCESSORIES
S226-01 LOADING PLATE Ø 450 mm
S226-02 LOADING PLATE Ø 600 mm
S226-03 LOADING PLATE Ø 760 mm
S226-09 SET OF TELESCOPIC EXTENSION RODS, aluminium
made, to be connected to the datum bar mod. S222-03
(2.5 m long) to obtain a max. adjustable lenght of 5.5 m
as requsted by ASTM, CNR Specifications
S223-03
“Y” MEASURING SYSTEM – SWISS METHOD
STANDARD: SNV 70312
Aluminium alloy made, lightweight and very easy to use, it may be
used as alternative solution to the datum bar assembly mod. S222-03.
This system is applicable to the plate bearing equipment with 3 dial
gauge or 3 displacement transducers.
Weight: kg 7 approx.
BENKELMAN BEAM APPARATUS
STANDARDS: NF P94-117-1 | NF P98-200/2 | AASHTO:T256
Utilized in conjunction with the plate bearing test equipment, to
determine the static deformation of road pavements EV1 – EV2 and
Westergard. See section “B” Bitumen, mod. B100 p. 166
S226-50
OFFICIAL ACCREDIA CALIBRATION CERTIFICATE
(equivalent UKAS, ENAC, DAKKS, SAS, COFRAC etc.) of the applied
load for the Bearing Test Equipment from mod. S222KIT to mod.
S226KIT (p. 514 to 518) and for Field CBR/Unconfined test equipment
mod. S131KIT, S210KIT, S220KIT (see p. 492…508).
The calibration is carried out only at Matest factory.
