STANDARD: ASTM C490
TWO GANG PRISM MOULD to produce 25x25x250 mm specimens
for expansion tests in autoclave.
Complete with 4 steel inserts. Weight: 6 kg approx.
STANDARD: BS 1881, 6073
TWO GANG PRISM MOULD to produce 75x75x254 mm specimens.
Complete with 4 steel inserts. Weight: 9 kg approx.
CONTACT POINTS stainless steel, spare for E072 and E073 moulds.
Pack of 10 pieces.
THREE GANG PRISM MOULD
FOR 40.1X40X160 MM MORTAR SPECIMENS
STANDARD: EN 12617-4
Comparable to: ASTM C438, NF P15-433
Used for the determination of linear shrinkage of cement mortar.
Manufactured from steel with hardness over 200 HV.
All surfaces are grinded and all parts are marked with an identification
number for a correct assembling.
A part-number is engraved on each mould and a Certificate of
Conformity is supplied along with.
Complete with 6 steel inserts and fixing screws.
Weight: 8.6 kg approx.
E075-01 Contact points, stainless steel, complete with fixing
screw. Pack of 12
E075-10 STANDARD: EN 12808-4
SPACER, teflon made, dimensions 15x40x160 mm to
put into the chamber of the E075 mould, to produce
10x40x160 mm specimens for shrinkage tests as per
EN 12808-4 Standard.
Pack of 6 spacers.
E075-11 INSERTS, for the 10x40x160 mm specimen.
Standard: EN 12808-4
Pack of 12 inserts.
E107 STANDARDS: NF P15-434 / DIN 1164
THREE GANG PRISM MOULD to produce 40x40x160 mm
specimens. Made from steel 55 HRB. Complete with 6
inserts. Weight: 8 kg approx.
E113 STANDARD: NF P18-427
THREE GANG PRISM MOULD to produce 70x70x280 mm
specimens. Made from steel 55 HRB.
Complete with 6 inserts. Weight: 17 kg approx.
E107-01 CONTACT POINTS, spare for E107 and E113 moulds.
Pack of 12 pieces.