STANDARDS: EN 196-1, EN 196-3, EN 413-2, EN 459-2, EN 480-1 | DIN 1164-5, DIN 1164-7 | ASTM C305M | AASHTO T162
Mixmatic has an extremely sturdy fabricated frame for an intensive laboratory use. Complete with stainless steel polished beater, mixing bowl
and automatic sand dispensers having dimensions and geometry to grant the correct sand insertion, without residual and disaggregation
between fine and coarse portions. Dispenser for additives (see accessory mod. E092-05). Dispenser for automatic water addition (see accessory
mod. E092-06).
MAIN FEATURES
Rugged design
Planetary transmission for silent and low
maintenance operation.
Transparent CE-conform protection of the mixing
area, to allow the mixture looking during the test.
Digitally controlled rotation speed..
Easy and fast bowl insertion and removal.
Safety system of bowl presence and correct position
to avoid dangerous working, with double sensor
of removed bowl with load/unload sequential
discrimination.
Emergency stop button.
Firmware:
– Different automatic programmable mixing cycles conforming to the
a.m. Standards.
– The operator can also program up to 30 automatic personalized
mixing cycles, easy to set through Touch Screen.
– Synchronised acoustic signals with cycle steps.
– Electronic control unit with touch screen colour display, that runs
like a standard PC based on Windows operating system for the
management and analysis of the data, test results, graphs. The
touch-screen icon interface allows an easy set up of the parameters
and immediate execution of the test. Direct connection to Intranet
(connection to a LAN network) and Internet to establish a remote
communication and receive an immediate diagnostic analysis of
the potential problem from Matest technicians, or for updates of
the software.
Hardware technical details: see p. 18
Unlimited memory storage with: 2 USB ports, 1 SD card slot,
RS232/485 serial port.
– Rotational motor feeded through inverter to grant the max. precision
of the rotational speed, adjustable by the operator on the display.
– Possibility of manual mixing cycle.
– Possibility to select different languages.
Detailed indication of all the times (elapsed from the test start,
residual to end test, elapsed from and test and bowl removal), state
of cycle development with analogue bar, speed, active phase (sand,
water), test state (correct execution or test interruption with lost
results), type of current test.
Power supply: 230V 50-60Hz 1ph
Dimensions: 530x620x780 mm
Weight: 85 kg approx.
E092M KIT MIXMATIC
ACCESSORIES
E092-05 DISPENSER (supplementary) with hopper to ease the
manual introduction of additives etc. into the bowl, also
during the mixing phase.
E092-06 DISPENSER (supplementary) with hopper for the automatic
introduction (managed by the software) of water
into the bowl, also during the mixing phase.
E092-10 SPARE stainless steel bowl.
E097-01N REFERENCE SAND, size from 0.08 to 2 mm to
EN 196-1 Standard.
Bag of 1350 g. Pack of 16 bags for total of 21.6 kg
E097-02 GRADED NATURAL SILICA SAND, type Ottawa,
to ASTM C109, C778 Standards. Bag of 25 kg
