STANDARDS: EN 12390-4, EN 772-1 | BS 1881:115, 6073 | DIN 51220 | NF P18-411 | ASTM C39, C140, C1314 | AASHTO T22 | GOST 10180-2012 3000 KN CAPACITY
ACCESSORIES FOR 3000 kN BLOCKS MACHINES FROM MOD. C089-15 TO C089-19N
C111-32 DISTANCE PIECE, 20 mm high for cylinders Ø 150×300 mm
C111-12 DISTANCE PIECE, 73+50 mm high for cubes 200 mm side
C111-13 DISTANCE PIECES, 73+50+50 mm high for cubes 200
and 150 mm side
C111-14 DISTANCE PIECES 73+50+50+50 mm high for cubes
200, 150 and 100 mm side
C111-15 DISTANCE PIECES 50+50 mm high for cylinders
Ø 110×220 mm
C111-24 DISTANCE PIECE 50 mm high
C111-25 DISTANCE PIECE 73 mm high
Note: The cylinders Ø 160×320 mm do not require any distance
piece.
C111-50 DISTANCE PIECE, it eliminates the heavy procedure to lift
the lower rectangular platen and to add distance pieces.
Technical details: see p. 320
C115-01 TWO WAY HYDRAULIC VALVE, connected to the motorized
pumping unit of the machine to activate a second
frame. Technical details: see p. 318
C097-05 CALIBRATION CLASS 1, starting from 1% of the full
range. With a special calibration procedure it is possible
to grant Class 1 practically on the full range of the compression
machine. Applicable only on digital machines.
C097-08 OFFICIAL ACCREDIA (Equivalent UKAS, ENAC, DAKKS,
SAS, COFRAC etc. ) HARDNESS CERTIFICATE of upper
and lower compression platens. Minimum hardness:
55 HRC. See p. 313
C097-01 DUAL LOW CAPACITY DIGITAL RANGE, complete with
appropriate pressure transducer, only for digital
machines. Recommended range 0-250kN.
Technical details: see p. 313
C100 SPLITTING TENSILE test device for cylinders.
EN 12390-6 | ASTM C496
Technical details and other models: see p. 314
AS AN ALTERNATIVE:
C112-05 KIT of 4 HANDLES to lift the lower platen, making the
positioning of distance pieces easier.
Technical details: see p. 320
C117 SLIDING RAIL CARRIAGE, for an easy removal of the
upper block platen, to perform tests on blocks or on
standard cubes and cylinders.
C127N GRAPHIC PRINTER on thermo-paper on board for digital
models
C127-11 THERMO-PAPER roll for printer (pack of 10 rolls)
C121-08 SAFETY GUARDS, polycarbonate, with hinges and lock,
to CE Directive. See p. 317
C121-51 STOP SWITCH on safety guard. See p. 317
C103 SPLITTING TENSILE test device for self blocking pavers
and cubes. EN 1338, 12390-6.
Technical details: see p. 314
AS AN ALTERNATIVE:
C103-01 SPLITTING TENSILE test
device for self blocking
pavers and cubes
having max. dimensions
300x500mm, directly
fixed on the large compression
platens.
EN 1338, 12390-6.
Technical details:
see p. 314
C106 FLEXURAL TEST DEVICE for concrete beams.
EN 12390-5 | ASTM C78, C293 | AASHTO T97
Technical details: see p. 315
E170 COMPRESSION DEVICE to test cement specimens
40.1×40 mm EN 196 | ASTM C349
Technical details and other models: see p. 315
C104-10N SERVO-STRAIN
Servocontrolled Software, system of:
– Load or Strength
– Displacement
– Strain
This system can be used only with Servo-Plus Evolution
machine mod. C089-19N. Technical details see p. 282
C125N ELASTIC MODULUS determination of the secant compression
on concrete. Automatic system with pace rate
control also when releasing the load, applicable only to
high stability frames with Servo-Plus Evolution.
EN 12390-13, 13412, 13286-43, UNI 6556,
ASTM C469, ISO 6784, DIN 1048, BS 1888:121
Technical details: see p. 284
C126 BENCH to hold the compression machine. See p. 317
C104-04 CONSOLE HOUSING THE SERVO-PLUS EVOLUTION
The pump assembly lined with sound proofing material
for noise reduction and the digital system are encased to
enhance the design and look of the machine.
Technical details: see p. 314
