MAIN FEATURES FOR ALL MODELS 4000 KN CAPACITY
Max. vertical daylight: 590 mm
Horizontal daylight between columns: 340 mm
Compression platens Ø 287×60 mm
Calibration accuracy: Class 1
Max. ram travel 60 mm approx.
High stiffness and heavy weight 4 columns frame
(german-style).
Power supply (motorized models):
230V 1ph 50Hz 750W
Dimensions: 1200x900x1900 mm approx.
Weight: 2800…2900 kg
ACCESSORIES FOR 4000 kN MACHINES
C086-10 DISTANCE PIECE, 50 mm high
C086-11 DISTANCE PIECE, 25 mm high
Note: Vertical daylight of the compression platens is 530 mm.
The operator will have to buy the needed distance pieces
to reduce the daylight between the compression platens
to get the correct daylight of the specimen under test
plus approx. 10 to 15 mm
C112-11 UPPER+LOWER LARGE COMPRESSION PLATENS
320x510x55 mm to test also blocks. It is necessary to
have also the sliding rail carriage mod. C117
C117 SLIDING RAIL CARRIAGE,
for an easy removal of
the large block upper
platen
C127N GRAPHIC PRINTER on
thermo-paper on board
C127-11 THERMO-PAPER roll for
printer (pack of 10 rolls)
C104-10N SERVO-STRAIN
Servocontrolled Software, system of:
– Load or Strength
– Displacement
– Strain
This system can be used only with Servo-Plus Evolution
machine mod. C088-11N. Technical details see p. 282
C125N ELASTIC MODULUS determination of the secant compression
on concrete. Automatic system with pace rate
control also when releasing the load, applicable only to
high stability frames with Servo-Plus Evolution.
EN 12390-13, 13412, 13286-43, UNI 6556,
ASTM C469, ISO 6784, DIN 1048, BS 1888:121
Technical details: see p. 284
C121-04 SAFETY GUARDS, polycarbonate, with hinges and lock,
to CE Directive. See p. 317
C121-51 STOP SWITCH on safety guard. See p. 317
C115-01 TWO WAY HYDRAULIC VALVE, connected to the motorized
pumping unit of the machine to
activate a second frame.
Technical details: see p. 318
C097-05 CLASS 1, starting from 1% of the
full range. With a special calibration
procedure it is possible to grant
Class 1 practically on the full range
of the compression machine.
C097-01 DUAL LOW CAPACITY DIGITAL RANGE, complete with
appropriate pressure transducer. Recommended
range 0-250kN. Technical details: see p. 313
C097-08 OFFICIAL ACCREDIA (Equivalent UKAS, ENAC, DAKKS,
SAS, COFRAC etc. ) HARDNESS CERTIFICATE of upper
and lower compression platens. Minimum hardness:
55 HRC. See p. 313
C107-01 AUTO-CENTERING DEVICE for cubes 100 and 150 mm
side, and cylinders Ø 100 and 150 mm.
Technical details: see p. 316
C103
SPLITTING TENSILE test device for
self blocking pavers and cubes.
EN 1338, 12390-6.
Technical details: see p. 314
C106
FLEXURAL TEST DEVICE for concrete beams.
EN 12390-5 | ASTM C78, C293 | AASHTO T97
Technical details: see p. 315
E170
COMPRESSION DEVICE to test
cement specimens 40.1×40 mm
EN 196 | ASTM C349
Technical details and other models:
see p. 315
