STANDARD: EN 1015-9 Method A
PROTECTION AND REPAIR OF CONCRETE
STRUCTURES.
DETERMINATION OF STIFFENING TIME
STANDARD: EN 13294
E083-10
LEVER SUPPORT (drill-holder type),
complete with washer and penetration rod
brass made, clamp and locking support.
Used for the workable life and correction
time of fresh mortar, and for the determination
of stiffening
time on products and systems for the
protection and repair of concrete
structures. Complete with container.
Dimensions: 380x300x500 mm
Weight: 12 kg approx.
SPARE
E083-11 CONTAINER, rigid aluminium
made, Ø 90 by height
60 mm, complete with cover.
ACCESSORY
V075-12SP DIGITAL BALANCE, 16 kg
capacity and 0.1 g division,
with hold of the breaking
load and with tare.
E067
CRAKING TEST MOULD
STANDARD: NF P15-434
Used to produce ring-shaped
specimens designed for cracking
tests on hydraulic binders.
This test consists of measuring
the formation time of a crack
on the test specimen.
Weight: 8 kg
E083
PLUNGER PENETRATION APPARATUS
MASONRY CEMENT, BUILDING LIME CONSISTENCY
STANDARDS: EN 413-2, 459-2, 1015-4
Used to determine the consistency of fresh mortar, lime and
masonry cement.
The base is foreseen of a device to
locate the test cup.
The height of the drop can be accurately
adjusted to 100 mm.
Supplied complete with test cup
and tamper, both anodized aluminium
made.
Dimensions: 200x200x700 mm
Weight: 8 kg approx.
E080
PLASTER
EXTENSOMETER
STANDARDS: BS 1191 | UNI 6782
Utilized to measure the linear expansion of a paste of standard
consistence. The extensometer comprises an horizontal cradle
100 mm long x 60 mm wide x 25 mm deep closed at one end and
open to the other.
The open end is in contact with a dial gauge spindle, so that the
lateral expansion of the specimen is measured. The dial gauge has
10 mm travel and 0.01 mm. graduation.
Dimensions: 250x80x80 mm
Weight: 3 kg
A105
CALCIMETER CARBONATE CONTENT CACO³ IN
LIMESTONE AND LIME MARL
Specifications: see p. 60
E082-01N
WATER RETENTION
STANDARDS: EN 413-2
Used for determining the water retention of
masonry cements.
Made from rigid plastic inside
Ø 100 ± 1 mm, inside height 25 ± 1 mm
Weight: 300 g approx.
