STANDARDS: EN 12350-2 | EN 12350-8 | ASTM C143
BS 1881:102 | AASHTO T119 | NF P18-305
SLUMP CONE COMPLETE TEST KITS. Matest proposes different versions:
C180-KIT SLUMP CONE, COMPLETE SET, ideal for laboratory
tests including:
C180-01 Slump Cone, stainless steel made
C180-02 Tamping rod, galvanized steel, Ø 16×600 mm
C180-03 Slump Cone funnel, galvanized steel
C180-06 Graduated slump scale engraved in 0.5 cm increments
with sliding measuring rod
C180-07 Base, galvanized steel, complete
V184 Aluminium scoop, 500 cc capacity
V178-01 Fine wire brush
Weight: 10 kg approx.
C178-KIT PORTABLE SLUMP CONE TEST SET, including:
C181 Slump Cone, galvanized steel
C179-02 Graduated steel tamping rod, galvanized, Ø 16×600 mm
C179-01 Base, manufactured from heavy duty galvanized steel,
complete with clamps and measuring bridge which is
also used as carrying handle.
The slump is measured using the tamping rod having
a graduated scale engraved in 1 cm increments.
The components of the set are fitted together
for easy carrying. Very practical, robust, ideal
for site use.
Weight: 8 kg approx.
C182-KIT SLUMP CONE, COMPLETE SET, including:
C181 Slump Cone, galvanized steel
C180-02 Tamping rod, galvanized steel, Ø 16 x 600 mm
C180-04 Base plate, galvanized steel
V176-01 Stainless steel rule,
300 mm long
V184 Aluminium scoop,
500 cc capacity
V178-01 Fine wire brush
Weight: 5 kg approx.
C179-KIT PORTABLE SLUMP CONE TEST SET, including:
C180-01 Slump Cone, stainless steel made
C179-02 Graduated steel tamping rod, galvanized, Ø 16×600 mm
C179-01 Base, galvanized steel, complete with clamps and
measuring bridge, as described above.
Weight: 8 kg approx.
Note:
Each component of the kits can be ordered separately.
The user can personalize the kit composition for the Slump Cone test.
C182P KIT
SLUMP CONE, PLASTIC, complete set including:
C181P Slump Cone, plastic. Max. temperature: 40 °C
Weight: 750 g
C180-02 Tamping rod, galvanized steel, Ø 16×600 mm
C180-04 Base plate, galvanized steel
V176-01 Stainless steel rule, 300 mm long
V184 Aluminium scoop, 500 cc capacity
V178-01 Fine wire brush
Weight: 5 kg approx.
ACCESSORY
C180-03P Cone Filling Funnel, plastic. Weight: 250 g
Note: Each component of this kit can be ordered separately.
C180-01
SLUMP CONE only, manufactured from 
stainless steel, diameter 100/200 mm,
height 300 mm, thickness 1.5 mm
Weight: 2 kg approx.
C181 SLUMP CONE only, galvanized steel,
Ø 100/200 mm, height 300 mm,
thickness 1.5 mm
Weight: 2 kg approx.
V185-03
SCOOP, STAINLESS STEEL
STANDARD: EN 12350-1
Used to sample fresh concrete
Capacity: 5 kg of concrete
Dimensions: Ø 125×250 mm
C185
COMPACTING FACTOR
APPARATUS
STANDARD: BS 1881:103
Designed to undertake a more precise
and sensitive test procedure than the
simple slump test.
The apparatus consists of two conical
hoppers mounted on a cylinder.
Each hopper has a hinged flange
with quick release mechanism and
everything is mounted on a rigid steel
stand.
The compacting factor is the ratio
between the weight of the partially
compacted concrete and the weight
of the fully compacted concrete.
Supplied complete with tamping rod
diameter mm 16×600 long.
Dimensions: 500x400x1510 mm
Weight: 55 kg approx.
C192 KIT
FLOW TABLE
STANDARDS: EN 12350-5 | DIN 1048
The apparatus comprises a galvanized steel conical mould,
Ø 130/200×200 mm, double steel flow table with galvanized top
plane, guide device, wooden tamper.
Used to determine the workability of concrete. The top table has a
square surface of 700×700 mm, hinged on one side.
Weight: 30 kg approx.
SPARES
C192-01 Conical mould, galvanized steel made,
Ø 130/200×200 mm
C192-02 Wooden tamper
