C104-10N
STRAIN, DUCTILITY, POST-BREAKING BEHAVIOUR
LIGHTWEIGHT AGGREGATES FOR CONCRETE | EN 13055-1
Compression tests on concrete specimens, steel fiber reinforced concrete (FRC), building material, and for research and experimental tests in
order to evaluate the behavior of a specimen subjected to compression stress.
NEEDED ACCESSORIES for High stability
Servo-Plus Evolution compression machines
C104-31SP
SUPPORTING DEVICE for displacement transducer, able to grant
an high precision and an high stability control of the test in mm/min.
S336-14
LINEAR DISPLACEMENT TRANSDUCER, strain gage technology, 50
mm travel to permit a control between 0.2 mm/min and 2 mm/min
Other models of linear displacement transducers at p. 549
Note: To permit a control lower than 0.2 mm/min. other transducers
available on request.
NEEDED ACCESSORY
for all the other Servo-Plus Evolution machines
C104-31 HOLDER for displacement transducer.
S336-14 LINEAR DISPLACEMENT TRANSDUCER
Strain gage technology, 50 mm travel.
Other models of linear displacement transducers listed
at p. 549
C109-15N
DEFLECTION MEASUREMENT ON STEEL FIBER REINFORCED CONCRETE BEAMS
100X100X400(500) mm AND 150X150X500(600) mm
STANDARDS: EN 11039-03, 14487-1, 14488-3, 14651-05 | ASTM C1018, C1609
Used on a flexural frame machine complete with Servo-Plus Evolution (to be selected among the models C090-07N, C091-03N) and by adding
the specific equipment required to perform the test, that is described and illustrated in detail at p. 295
PUNCHING TEST ON SPRAYED CONCRETE SPECIMENS WITH MEASUREMENTS OF THE ENERGY ABSORPTION
STANDARDS: EN 10834, 14488-3, 14488-05 | UNI 10834
Used on a flexural frame machine and a Servotronic model C090-07N, with the addition of the specific equipment required to perform the test,
that is described and illustrated in detail at p. 295
