STANDARDS: EN 13286-47 | ASTM D698, D1557, D1883
AASHTO T99, T180, T193 | BS 1377:4, 1990, 1994
NF P94-093, P94-066 | DIN 18127
UNE 7365, 7255, 103-501-94 | CNR UNI 10009
CNR N. 29, 69 | DUTCH RAW | AS 1289 and most
International Standards.
Designed to compact Proctor and CBR specimens, it ensures an
extremely uniform compaction degree, granting reliable and repeatable
test results.
The microprocessor software allows to select and perform different
compaction cycles in a fully automatic system, by strictly meeting
the mentioned International Standards.
The blows are automatically distributed as requested by the
selected Standard, with turntable rotation and rammer displacement
through photoelectric cell sensors and microprocessor. Top quality
components and high accuracy mechanical workings grant very
long life also under intensive utilisations.
The digital control panel is separate from the machine and it can be
fixed to the wall or mounted on a bench.
The high resolution graphic display (blue negative) 320×240 pixels
visualizes selected Standard, total number of blows, effected and
remaining ones to end the test, and execution of each layer.
The compactor is easy to use, friendly menu driven, versatile, of
simple and practical maintenance.
The user can select and memorize up to 10 personalized test
cycles, that can be later on modified or replaced by other ones.
This is a very important function, because it allows to update the
Compactor to new Standards, or any Standard not included in the
microprocessor, or for research purposes.
The original lift system of the rammer can be selected at 12” or 18”,
or at 300 or 450 mm, granting a correct and constant fall height.
Rammer drop speed: 1 blow each 2 seconds.
The compactor accepts moulds having Ø 4” and 6”, 100 and
150 mm, both Matest made or from other producers, thanks to its
universal mould fixing system.
The machine is supplied without rammers to be ordered separately
and selected according to the desired Standard (rammers are interchangeable).
Not sellable in CE markets
(see accessory: safety guards mod S199-11)
Power supply: 230V 1ph 50Hz 500W
Dimensions: 610x470xh1710 mm
Weight: 200 kg approx.
NEEDED ACCESSORIES
S199-06 STANDARD RAMMER Ø 50 ± 0.2 mm
and 2500 ± 10 g weight
S199-07 MODIFIED RAMMER Ø 50 ± 0.2 mm
and 4535 ± 5 g weight
Modified rammer are hardened for wear resistance.
Conforming to: EN 13286-47 | BS 1377:4 | DIN 18127
UNE 7255, 7365, 103-501-94 Standards.
OR:
S199-08 STANDARD RAMMER Ø 50.8 ± 0.13 mm
and 2491,25 ± 1.25 g weight
S199-09 MODIFIED RAMMER Ø 50.8 ± 0.13 mm
and 4537 ± 3 g weight
Modified rammer are hardened for wear resistance.
Conforming to: ASTM D558, D559, D698, D1557, D1883
NF P94-066/93 | CNR UNI 10009
CNR N. 69 | ASHTO T99, T180, T193
OR:
S199-13 STANDARD RAMMER, Ø 50 ± 0.4 mm
and 2700 ± 10 g weight
S199-14 MODIFIED RAMMER, Ø 50 ± 0.4 mm
and 4900 ± 10 g weight
Modified rammer are hardened for wear resistance.
Conforming to: AS 1289 (Australian) Standard.
