It is a good reliability electronic device used to measure pore
pressure. It requires a de-airing block. Every transducer must be
connected to the automatic data acquisition system mod. S334
(see p. 559) or mod. S301-05 ( see p. 544).
– Input voltage: 10 volts dc, Sensitivity range: 2 – 4 mV/V
– Accuracy: 0.15 fs
– Pressure connection: 0.25 BSP
– Protected against corrosive pore water pressure
– 2 metres cable and 5 pin plug included
MODELS
S336-50 Pressure transducer up to 1000 kPa
S336-51 Pressure transducer up to 2000 kPa
ACCESSORIES
S336-55 De-airing block for pressure transducer
EXTENSION CABLE FOR TRANSDUCERS
MODELS
S336-30 2 metres long
S336-31 5 metres long
S336-32 10 metres long
Note: It is recommended to use not more than 10m of
extension cable to avoid noise problems that
might occur.
S356N
2 CHANNELS UNIT FOR PORE
PRESSURE MEASUREMENT
Based on a high resolution graphic display this instrument allows
continuous control and monitoring of pore pressure measurements
coming from pressure transducers.
Models like S336-50 or S336-51 supplied along with proper connection
cable can be plugged into this new S356N readout so that
manual triaxial tests can be performed without need of automatic
data acquisition units or outdated mercury manometers.
S356N unit allows real time visualization of the pore pressure
measurements and subsequent peak data recording through its
dedicated peak function.
Technical specifications
– Measuring units (selectable): mbar, bar, MPa, kPa, psi
– Acquisition and data processing system at 24 bit, effective resolution:
17 bit.
– Operator interface composed by 5 multi-functions pushbuttons;
function icons shown on the display
– The two analogue-digital channels accept sensors at 2mV/V
– Languages: see C108N at page 219…221
– Graphic display with high resolution: 192×64 pixels
– Class: 0.5% starting from 10% of maximum value
Power supply: 230V 1ph 50-60Hz
Dimensions: 230x145x240 mm
Weight: 4 kg approx
ACCESSORIES for S356N
– Pressure transducers, available models see p. 549
– De-airing block
– Extension cables for transducers
