STANDARDS: EN 196-1, 196-08 | ISO 679 | ASTM C109, C511
For curing large quantities of mortar, cement and concrete specimens,
at controlled humidity and temperature.
Aluminium and policarbonate made, it is complete with precision
digital thermostat and four robust shelves.
The humidity from 90% to saturation is maintained through water
nebulizers activated by compressed air, and the temperature by an
immersion heater and refrigerator unit (accessory mod. E141)
Temperature range: from ambient to +30 °C, accuracy ± 1 °C.
The cabinet requires a compressed air source. (see accessory)
Inside dimensions: 1090x470x1200 mm
Overall dimensions: 1350x570x1600 mm
Power supply: 230V 1ph 50-60Hz 2000W
Weight: 100 kg approx.
ACCESSORIES for mod. E138
V206-01 AIR COMPRESSOR, air displacement: 250 litres/min.
Tank capacity : 100 litres (see p. 598)
Recommended for standard use.
V206-02 AIR COMPRESSOR, air displacement: 400 litres/min.
Tank capacity : 200 litres (see p. 598)
Recommended for intensive or continuous use .
E138-11 TUBING AND ACCESSORIES to connect
the E138 cabinet to the air compressor
E134-11 PAN, 240x300x70 mm, polythene made,
it accepts up to six 40.1x40x160 mm
prisms for curing in water.
ACCESSORY for mod. E136, E136-01, E138
It cools the water from room temperature up to +10 °C with supply
capacity of 2 litre/minute.
Stainless steel made, complete with motor pump, digital thermostat
sens. 0.1°C, it is connected to water baths and tanks where a lower
temperature than the room one is required.
Complete with tubing and accessories for bath connection.
Power supply: 230V 1ph 50Hz 750W
Dimensions: 550x500x880 mm
Weight: 55 kg approx.