STANDARDS: ASTM C39 | AASHTO T22 | BS 1610 | GOST 10180-2012 2000 KN CAPACITY
ACCESSORIES FOR 2000 kN MACHINES FROM MOD C058-02 TO C058-05N
C111-26 DISTANCE PIECE, 76 mm high for cubes 200 mm side
C111-26 + C111-22
DISTANCE PIECES, 76+50 mm high for cubes 200 and 150 mm
side
C111-26 + C111-22 + C111-22
DISTANCE PIECES 76+50+50 mm high for cubes 200, 150 and
100 mm side
C111-22 DISTANCE PIECE 50 mm high
C111-31 DISTANCE PIECE 20 mm high
C110-15 LOWER COMPRESSION PLATEN, Ø 216×40 mm, hardened
and rectified to test cubes 100 and 150 mm, as an
alternative to the standard platen Ø 278 mm
Technical details: see p. 319
C115-01 TWO WAY HYDRAULIC VALVE, connected to the motorized
pumping unit of the machine to activate a second
frame. Technical details: see p. 318
C097-05 CALIBRATION CLASS 1, starting from 1% of the full
range. With a special calibration procedure it is possible
to grant Class 1 practically on the full range of the compression
machine. Applicable only on digital machines.
C097-01 DUAL LOW CAPACITY DIGITAL RANGE, complete with
appropriate pressure transducer, only for digital
machines. Recommended range 0-250kN.
Technical details: see p. 313
C107-01 AUTO-CENTERING DEVICE for cubes 100 and 150 mm
side, and cylinders Ø 100 mm
Technical details: see p. 316
C112-10 UPPER+LOWER LARGE COMPRESSION PLATENS
245x510x55 mm WITH SEAT BALL to test also blocks.
C110-15
C127N GRAPHIC PRINTER on thermo-paper on board for digital
models
C127-11 THERMO-PAPER roll for printer (pack of 10 rolls)
C121-05 SAFETY GUARDS, polycarbonate, with hinges and lock,
to CE Directive. See p. 317
C121-51 STOP SWITCH on safety guard.
See p. 317
C100 SPLITTING TENSILE test device for cylinders.
EN 12390-6 | ASTM C496
Technical details and other models: see p. 314
C103 SPLITTING TENSILE test device for self blocking pavers
and cubes. EN 1338, 12390-6.
Technical details: see p. 314
C106 FLEXURAL TEST DEVICE for concrete beams.
EN 12390-5 | ASTM C78, C293 | AASHTO T97
Technical details: see p. 315
E170 COMPRESSION DEVICE to test cement specimens
40.1×40 mm EN 196 | ASTM C349
Technical details and other models: see p. 315
C126 BENCH to hold the compression machine. See p. 317
C104-04 CONSOLE HOUSING THE SERVO-PLUS EVOLUTION
The pump assembly lined with sound proofing material
for noise reduction and the digital system are encased to
enhance the design and look of the machine.
Technical details: see p. 312
