Menu Close

Shop

Explore your true style

C096N HIGH STIFFNESS FLEXURAL MACHINE, 360 KN CAPACITY

Category:

STANDARDS: EN 12390-5, 1339, 1340, 14488-5 | ASTM C78, C293, C1550  360 KN CAPACITY

The frame has been designed to perform different kind of tests, from the simple third/centre point flexural test on beams to the advanced FRC
displacement controlled tests and energy absorption tests on sprayed concrete. Accurate results are granted by the high stiffness of the frame
according to the international Standards requirement (more than 200 kN/mm) and by a high precision load cell measurement system fitted into the
frame. The high horizontal daylight of the testing chamber allows to test big dimension specimens. Rollers are optional and must be ordered
separately according to user needs.

MAIN FEATURES
1 mm deformation every 200 kN.
Easy positioning of the specimen.
High precision load cell.
Possibility to test any type of specimen: beams,
flagstones, blocks, kerbs, FRC, slabs.
Graduated scales for an easy rollers adjustment.
Piston travel limit device.
Simple action piston with counterweights.
Power supply: 230V 1ph 50Hz 750W.

For a further improvement of energy efficiency and silent operation,
(optional device code C099N). Technical details, p. 223

C096N SPECIFIC APPLICATIONS

TECHNICAL SPECIFICATIONS

C095N-11
FLEXURAL TESTS ON CONCRETE BEAMS
STANDARDS: EN 12390-5 | ASTM C78, C293
Upper and lower roller group for
third point and centre tests on
concrete beams up to
200x200x800 mm
Rollers size:
30 mm Ø by 312 mm long,
cadmium plated against
corrosion.
Weight: 65 kg approx.

NEEDED ACCESSORY
C095N-18 FOUR DISTANCE PIECES height 43 mm each, to adjust
the vertical useful light of the frame.

C095N-12
FLEXURAL TESTS ON PAVING SLABS AND ANY
TYPE OF MATERIAL HAVING MAX. WIDTH 600 MM
STANDARD: EN 1339
One upper centre loading roller and
two lower roller assembly for tests
on paving slabs.
Rollers size:
40 mm Ø by 620 mm long,
cadmium plated against
corrosion.
Weight: 76 kg approx.
NEEDED ACCESSORY
C095N-18 FOUR DISTANCE PIECES height 43 mm each, to adjust
the vertical useful light of the frame.

C095N-19
FLEXURAL TESTS ON CONCRETE BEAMS
STANDARDS: EN 12390-5
Two upper loading rollers for third point and centre tests on
concrete beams up to 200x200x800 mm
Rollers size: 40 mm Ø by 312 mm long, cadmium plated against
corrosion, to be used with the rollers assembly C095N-12.
Weight: 65 kg approx.
NEEDED ACCESSORY
C095N-18 FOUR DISTANCE PIECES height 43 mm each, to adjust
the vertical useful light of the frame.

C095N-13
UPPER TAMPER FOR TESTING KERBS
STANDARDS: EN 1340
The Tamper, steel made, is mounted on a rotating coupling and fixed
to the upper part of the machine to apply a flexural load on the kerb,
without any torsional stress.
To be used with the rollers assembly C095N-12.
Weight: 6 kg approx

ACCESSORY
C095N-18 FOUR DISTANCE PIECES height 43 mm each, to adjust
the vertical useful light from 221 to 135 mm
(25 mm with piston excursion)

C095N-14
COMPRESSION TESTS UP TO 320KN CAPACITY
The multipurpose (flexural) frame can be equipped with Lower platen
and Upper spherically seated platen, having Ø 165 mm by 30 mm
thick, to perform compression tests on low strength and small size
specimens.
To be used with the four distance pieces C095N-18.
The device can be used also for compression tests on mortar specimens
(by using suitable devices E170 etc. listed on page 315, splitting
tensile tests (by using suitable
C100, C103 etc. devices listed
on page 314).
Weight: 20 kg approx.

C095N-15
DISPLACEMENT TRANSDUCER, to measure the piston travel.
Supplied complete with holder to the test frame.
Travel: 100 mm
Full bridge at 350 Ohm
Indipendent linearity: < 0.1%
Standard sensitivity: 2 mV/V

C095N-17
FLEXURAL TOUGHNESS OF FIBRE REINFORCED
CONCRETE (FCR) SLABS
STANDARD: ASTM C1550
BASE SUPPORT FRAME, holding the concrete slabs having 800 mm
diameter by 75 mm thick, complete with upper loading element.
Weight: 60 kg approx.

NEEDED ACCESSORY
S336-14 DISPLACEMENT TRANSDUCER, to measure the central
deformation of the slab under concentrated load.
Travel: 50 mm
Full bridge at 350 Ohm
Independent linearity: < 0.1%
Standard sensitivity: 2 mV/V

C090-14SP
ENERGY ABSORPTION TEST ON SPRAYED
CONCRETE SLABS
STANDARD: EN 14488-5
SQUARE BASE SUPPORT FRAME, holding the sprayed concrete slab
with useful inside dimensions 500×500 mm, complete with spherically
upper loading element.
Weight: 125 kg approx.

NEEDED ACCESSORY
S336-14 DISPLACEMENT TRANSDUCER, to measure the central
deformation of the slab under concentrated load.
Travel: 50 mm
Full bridge at 350 Ohm
Independent linearity: < 0.1%
Standard sensitivity: 2 mV/V

C090-15
DEFLECTION MEASUREMENT DEVICE
STANDARDS: EN 14488-3 | ASTM C1609, C1018
This device is fixed directly on the fiber reinforced concrete beam under test.
The device is placed between the loading bearers of a flexure frame or of a flexure device in a compression frame.
The test is performed by applying a flexural load to the concrete beam with load and displacement control and with automatic deflection measurement
of the loaded specimen.
It is possible to test fibre reinforced concrete beams 100x100x400 or 500 mm and 150x150x500 or 600 mm dimensions.

The deflection device is steel made with chromed finishing; it is supplied complete with transducer holders, vertically positioned on the two
opposite sides of the beam, but without the two transducers, for the measurement of deflection (mod. S336-11), and without the fork form
transducer (mod. C090-16) to be ordered separately.
Dimensions: 300x450x300 mm
Weight: 8 kg approx.

S336-11
DISPLACEMENT TRANSDUCER, HIGH PRECISION
STANDARDS: EN 14488-3 | ASTM C1609, C1018
To be attached to the device C090-15 for the measurement of
deflection and determination of toughness on fibre reinforced concrete
beams. Travel: 10 mm
Complete with cable and connector.
Two transducers are required.
C109-15N
FIRMWARE/SOFTWARE for:
– Measurement of deflection on fibre reinforced concrete beams.
– Determination of toughness, first crack strength and ductility.
– Energy absorption test on sprayed specimens. (see p. 283)
STANDARD: EN 14488-5
C109-14N
FIRMWARE/SOFTWARE for flexural stengths (first peak,
ultimate and residual) EN 14488-3 (see p. 18).

C090-16
FORK FORM TRANSDUCER
STANDARDS: EN 11039-2, EN 14651
For the measurement of the Crack Mouth Opening Displacement
(CMOD) and the Crack Base, Medium and Tip Opening Displacement
(CTOD). Measuring range: 5 mm
Complete with cable and connector.
C090-18
DATUM BLOCK, to be glued on the lower side of the concrete
beam for the first crack strength test (CMOD). Pack of 24 pieces.

EN 14651 Clip gauge device
C090-20
DATUM BLOCK, square, to be glued on the concrete beam
surface for the deflection measurement on the two opposite sides
(CTOD). Pack of 24 pieces.

Reviews

There are no reviews yet.

Be the first to review “C096N HIGH STIFFNESS FLEXURAL MACHINE, 360 KN CAPACITY”

Your email address will not be published. Required fields are marked *