STANDARDS: EN 933-3 | UNI 8520-18 | NF P18-561 | NLT 354
The frame is anodized aluminium made and the
grids are stainless steel rod bars having diameter
from 5 to 15 mm according to the slot widths.
Sieve sizes, slot width tolerances and rod bars diameter
are checked one by one, and meet EN 933-3 Standard.
Each sieve is supplied complete with identification serial
number label.
Sieve dimensions: 275x275x475 mm
Weight: 2 kg each sieve.
A048N KIT COMPLETE SET of 14 bar sieves from 2.5 (A048-01)
to 50 mm (A048-17) slot width.
A048-14 BAR GRID SIEVE, slot width 9.5 mm. Used to check
the wear of the spheres of the Micro-Deval having
nominal size 10 mm.
ACCESSORIES for BAR (GRID) SIEVES
A048-20 KIT OF TWO DEVICES, anodized aluminium made,
complete with stainless steel screws, to fix one bar sieve
over another one, in order to get a cascade to be fitted
on mechanical sieve shakers.
A048-21 COVER for Bar Sieves, anodized aluminium made.
A048-22 RECEIVER for Bar Sieves, anodized aluminium made,
complete with coupling device to be fixed to the Matest
shakers mod. A059-02 KIT | A059-03 KIT | A059-04 KIT
A060-01
A048-15
GAUGE FOR AGGREGATE
FLATNESS INDEX
STANDARD: UNI 8520 part. 18
Used to determine the volume of each
circumscribed sphere.
Made of heavy brass sheet.
FLAKINESS SIEVES
STANDARD: BS 812:105.1
Used to determine if aggregate is flaky; i.e. if thickness is less than
0.6 of nominal size. Manufactured from heavy steel sheet, they
have dimensions as specified by Standards and are available in the
following size openings:
A049 KIT
COMPLETE SET of n°7 flakiness sieves.
Weight: 15 kg approx.
