STANDARDS: EN 1426 | ASTM D5 | BS 1377-2 | NF T66-004
AASHTO T49
Used to determine the consistency of a bituminous sample under
fixed conditions of load, time and temperature. The penetration is
expressed in distance of tenths of millimetres vertically penetrated
by a standard needle. The standard penetrometer is ruggedly constructed,
with an aluminium base table with levelling screws, plated
vertical rod, micrometric vertical adjustment device.
The slider is brass made with free fall.
The digital readout of the penetration values has readings in mm
and inch, with 0.01 mm resolution, LCD 5 digits display, with zero
set in any position.
Power: 1.5V battery.
The penetrometer is supplied with stop and release push button,
automatic zero set, micrometer adjustment, set of weights 50 and
100 g penetration needle, brass sample cups Ø 55×35 mm and
70×45 mm.
Dimensions: 220x170x410 mm
Weight: 11 kg approx.
B056-02 KIT
AUTOMATIC DIGITAL PENETROMETER
Basically structured as mod. B056-01 KIT but having a magnetic
controller device with electronic digital programmable timer that
automatically releases the plunger head and ensures free falling of
the needle during the 5-seconds test.
Power supply: 230V 1ph 50-60Hz 200W
Dimensions: 220x280x410 mm
Weight: 15 kg approx.
ACCESSORIES
for B056 KIT, B057 KIT, B056-01 KIT, B056-02 KIT
B056-09 PENETRATION BALL. Hot applied jont sealants.
Test method for the determination of penetration and
recovery (resilience).
STANDARD: EN 13880-3
B057-09 STANDARD PENETRATION CONE Ø 65 mm for measuring
the consistency of lubricating grease.
Brass body and steel point made. Weight: 102.5 g
STANDARDS: EN 13880-2 | ASTM D217 | IP 179
ISO 2137 | DIN 51804
