Menu Close

Shop

Explore your true style

B035-01N AUTOMATIC MARSHALL COMPACTOR FOR 6” AND 4” Ø MOULDS

Category:

STANDARDS: ASTM D6926 | ASTM D5581
comparable to AASHTO T245
This ruggedly constructed apparatus automatically compacts the
Marshall specimens 6” and 4” diameter, and stops after the preset
number of blows has been completed on the separate automatic digital
display counter.
The trip mechanism is structured so that the sliding hammer falls
at the same height at every blow. The mould is stationary and the
hammer has flat-foot.
The mould is held in position by a fast clamping device.
The unit incorporates a compaction wooden pedestal.
The drive mechanism lifts the 22.5 lbs. compaction hammer (Ø 6”),
plated against corrosion, to the height of 18” and allows a free fall
at 64 blows per minute.
Sliding mass for the Ø 6” specimen: 22.5 lbs. ± 0.01 lb (10.205 kg)
Sliding mass for the Ø 4” specimen: 4.53 kg
Free fall height: 18” ± 0.1” (457.2 mm)
Blow frequency: 64 per minute ± 4
The unit is equipped by an inverter, allowing to adjust the blow’s
frequency.
All moving parts are quickly/easily accessible for maintenance.
The control panel can be wall fixed or placed on a bench.
The compactor is supplied complete with collar to fix the mould 6”
diameter, but without the compaction hammer 6” diameter
(mod. B035-11N) and 4” diameter (mod. B035-12N), and the
moulds, which must be ordered separately (see accessories).
The compactor cannot be sold in CE markets without security guards
(see mod. B033-03)
Power supply:
230 V 1ph 50-60 Hz 500 W
Dimensions: 460x570x1700 mm
Weight: 180 kg approx.

ACCESSORIES
B035-11N COMPACTION HAMMER 6” diameter, complete, for the
B035-01N Compactor.
B035-12N COMPACTION HAMMER 4” diameter, complete, for the
B035-01N Compactor.
B035-13 REDUCTION COLLAR to fix the mould B029NKIT+B030KIT
(4” Ø) to the Marshall Compactor B035-01N
B033-03 SOUNDPROOF SECURITY CABINET, steel made, lined
with sound-proofing material, complying to CE Safety
Directive

Reviews

There are no reviews yet.

Be the first to review “B035-01N AUTOMATIC MARSHALL COMPACTOR FOR 6” AND 4” Ø MOULDS”

Your email address will not be published. Required fields are marked *