MAIN FEATURES
Compact stainless steel construction
Powered and controlled by the CDAS and TestLab
Software
Closed loop control up to 3500 kPa
0.001 kPa pressure and 0.0003 cc volume resolution
High volume capacity: 250 cc
Graduated scale for approximate volume change
indication
No need of air source
Pressurematic is the new solution for geotechnical laboratories
demanding automatic pressure and volume control. By using a
servo stepper motor directly controlled by the TestLab software and
CDAS, Pressurematic allows to build confining pressure and back
pressure up to 3500 kPa. The unparalleled performance of the
CDAS allows to regulate the pressure under a closed loop control
regulated to 0.1 kPa.
The operation is continuously monitored by the TestLab software,
thus catering to all levels of operator experience.
Standard effective stress tests require 2 Pressurematic units: one
for cell pressure and the other for back pressure which can be also
used to measure the change in volume of the specimen to 0.0003
cc. The latter is provided with a solenoid valve directly installed
on the triaxial cell and used to open and close the pressure line
whenever it is needed.
TECHNICAL SPECIFICATIONS
Output pressure: 3500 kPa
Volume capacity: 250 cc
Pressure accuracy: 0.25% of full scale
Pressure resolution: 0.001 kPa
Volume resolution: 0.0003 cc
Closed loop control of pressure regulated to 0.1 kPa
Closed loop control of volume regulated to 0.0003 cc
Maximum operational speed: 8 cc/s
NEEDED ACCESSORIES
S336-53 Pressure transducer up to 2000 kPa
S336-55 De-airing block for pressure transducer
S349-10 Solenoid valve
Power supply: 24V DC 1A powered from CDAS
Dimensions: 900x110x230 mm
Weight: 7 Kg approx.
OPTIONAL ACCESSORIES
S342-03 3 ways water distribution panel
TRIAXLAB AUTOMATED SYSTEM: suggested typical configuration
