Menu Close

Shop

Explore your true style

S262N EDOTRONIC AUTOMATIC CONSOLIDATION APPARATUS (OEDOMETER) TOUCH SCREEN HIGH PERFORMANCE

Category:

STANDARD: ASTM D2435-80 | CEN – ISO – TS 17892-5 | BS 1377:5
This automatic consolidation system, ideal for modern and efficient laboratories, has been created to eliminate or reduce to the absolute minimum
any forms of manual intervention, which the oedometer test requires. This therefore results in greater efficiency and cost effectiveness.
This appliance is extremely simple and easy to use.
Frame Specifications:
Edotronic, equipped with two coaxial cylinders, provides a precise
and timely weight positioning with two ranges of measurement:
0 – 1499 (N) Newton
1500 – 15000 (N) Newton
Input of compressed air (filtered): Max. 10 Bar
Resolution: 1 Newton
Precision: 0.5%…1%
Maximum load: 15 kN (with 10 Bar input)
There is no need of weights as the cylinder and pneumatic piston
take it to the desired weight in real time.
Weight application and removal are carried out automatically in the
test sequences.
The load value is measured by a pressure transducer which is built
in the regulation valve.
An additional high precision load cell will detect the effective load
value and perform precise control through a closed loop system,
granting repeatability and accuracy.

Firmware:
– Electronic control unit Cyber-plus Evolution with “Touch-Screen”
color graphic display ¼ VGA, that runs like a standard PC based
on Windows operating system, for the management of the data.
– The Touch-Screen icon interface allows an easy set-up of all the
parameters and prompt execution of the test. Read value results
are immediate and of extreme accuracy.
– On request the machine can perform the tests without any external
PC, because of the “Cyber-Plus” grants performances like a
PC.
– Direct connection to Intranet (connection to a LAN network) and
Internet to establish a remote communication and receive an
immediate diagnosis from Matest technicians, or for upgrades of
the Firmware.
– Unlimited memory storage with: 2 USB ports, 1 SD card.
– Simple, rapid linearisation and calibration procedure.
– The appliance comes completely equipped with the relevant
software.
– Possibility to select different languages.
– Hardware technical details: see p. 18
The following are not included: software oedolab connect, consolidation
cell, transducer, compressor, filter, that have to be ordered
separately (see accessories).
Power supply: 230V 1ph 50/60Hz
Dimensions: 290x450xh 610 mm
Weight: 30 kg approx.

ACCESSORIES
S262-12N SOFTWARE OEDOLAB CONNECT – MATEST MADE
Technical Data: see next page
V207 LABORATORY COMPRESSOR, tank capacity 50 litres,
nominal pressure 10 Bar.
S262-11 AIR FILTER, auto-draining, it reduces up to one micron,
complete with discharge.
S336-11 LINEAR DISPLACEMENT-DEFORMATION TRANSDUCER,
accurate and versatile.
Transducer 10 mm travel.
Indipendent linearity < 0.3%
S337-51 Calibration process of the linear displacement transducer
combined with the Edotronic.
S268 | S272-05 CONSOLIDATION CELLS, diffferent models:
see p. 529

Reviews

There are no reviews yet.

Be the first to review “S262N EDOTRONIC AUTOMATIC CONSOLIDATION APPARATUS (OEDOMETER) TOUCH SCREEN HIGH PERFORMANCE”

Your email address will not be published. Required fields are marked *