Menu Close

Shop

Explore your true style

PLASTIC CUBE, CYLINDER AND BEAM MOULDS MADE IN MATEST

Category:

These one-piece moulds, very appreciated by the user, are made from hard plastic, strong, light, undeformable; resistant to vibrations shocks and
wear. They do not require mounting and dismounting operations, thus saving time and labour. They just require a simple clean and demould oiling
before being ready for use again for many times. The specimen is expelled from the mould by compressed air or water.
The moulds: C223, C224, C230L, C230N, C232N, C228, C229 are produced by Matest and have competitive manufacturer prices.
CUBE MOULDS 150 MM SIDE
The cube moulds 150 mm side can be supplied in three different models, each one with different characteristics and weight.
All the models have a reinforced band on the walls, and the inside surfaces are very smoothed getting easier the specimen’s ejection.
Models C223 and C224, Matest made, have also reinforced corners, granting an additional resistance, and foresee a X reinforced band on
the base, improving the strenght of the mould, and allowing the user to give small blows with a rubber heated hammer (mod. V195) by easing
the specimen’s ejection. All the moulds are supplied with engraved the logo Matest.
All the moulds are also available unbranded, and on request they can be supplied with engraved the customer’s logo.

MODELS
C223 MADE IN MATEST
CUBE MOULD, 150 mm side, with X reinforced band on the base,
and reinforced corners.
Weight: 1300 g approx.
C224 MADE IN MATEST
CUBE MOULD, 150 mm side, HIGH DENSITY,
with X reinforced band on the base and reinforced corners.
The mould same to mod. C223 is manufactured from high density
mixture with total weight 1600 g, by obtaining a higher hardness
and strength of the plastic material.
– It increases the abrasion resistance, by reducing the wear action.
– It improves the pressure resistance during the specimen’s ejection,
by reducing mould breakages.
– It ensures a larger number of utilisations (with the same use care).

Weight: 1600 g approx.

C232N MADE IN MATEST
CUBE MOULD, 100 mm side, TWO GANGS, with X reinforced band
on the base. The inside surfaces are very smoothed getting easier
the specimen’s ejection. Weight: 1050 g approx.
C232
CUBE MOULD, 100 mm side, TWO GANGS, with reinforced corners
and band on the walls. Weight: 1200 g approx.

C230L MADE IN MATEST
CUBE MOULD, 150 mm side,
standard,lighweight,
entry level price.
Weight: 850…950 g approx

C230N MADE IN MATEST
CUBE MOULD, standard, reinforced band,
150 mm side.
Weight: 1250 g approx

C235
CUBE MOULD, 200 mm side, with X
reinforced band on the base and upper
double reinforced walls and corners.
Weight: 2550 g approx.

C237
BEAM MOULD, 100x100x500 mm sides, with X reinforced bands
on the base and upper double reinforced walls and corners.
Weight: 2100 g approx.
C238
BEAM MOULD, 150x150x600 mm sides, with X reinforced bands
on the base and upper double reinforced walls and corners.
Weight: 4400 g approx.
C228 MADE IN MATEST

CYLINDER MOULD, Ø 150×300 mm with upper and lower reinforced
bands. Weight: 2150 g approx.C228-01
CYLINDER MOULD, Ø 100×200 mm with reinforced bands.
Weight: 920 g approx.
C229 MADE IN MATEST
CYLINDER MOULD, Ø 160×320 mm with upper and lower reinforced
bands. Weight: 2200 g approx.

 

ACCESSORIES
C223-01 COVER, plastic, for C223, C224, C230N, C230L moulds.
Useful for transportations. Pack of 10 pcs.
C234-03 STOPPER, plastic, to plug the hole of the moulds
C223, C224, C228, C230N, C230L, C229.
Pack of 10 pcs.
C232-01 STOPPER, plastic, to plug the hole of the mould C232N
Pack of 10 pcs.
C235-01 STOPPER, plastic, to plug the hole of the moulds C228-01,
C232, C235, C237, C238. Pack of 10 pcs.
C230-01 FILLING HOPPER, stainless steel made, for an esier
filling of fresh concrete into the moulds:
C223, C224, C230, C230N
Supplied complete of clamping elastics.
C230-03 GRASPING PLIERS for C230 and C230N moulds, to get
easier the carriage.
C230-05 GUN, to connect to a water or air pressure, to eject the
specimen from the mould.

C223-05
IDENTIFICATION LABEL
Pack of 250 labels

C231N1
POLYSTYRENE CUBE MOULD 150 MM, ONE GANG
This cube mould, polystyrene made, is utilized for only one test,
because it must be broken when the specimen is demoulded.
It gives different advantages:
– it is provided of a top cover keeping inside heat and humidity
constant and acting as a curing room
– it protects the specimen as a packing during trasnsport of the
same
– it is extremely light
– any trouble concerning the cleaning, demoulding and maintenance
of the mould are eliminated.
Pack of 45 pieces.

 

 

Reviews

There are no reviews yet.

Be the first to review “PLASTIC CUBE, CYLINDER AND BEAM MOULDS MADE IN MATEST”

Your email address will not be published. Required fields are marked *