Menu Close

Shop

Explore your true style

H003N UNIVERSAL HYDRAULIC SERVO-CONTROLLED MACHINE 600 KN CAPACITY TO PERFORM STATIC TENSILE TESTS ON METALLIC MATERIALS.

Category:

STANDARDS: EN 10002, EN 10080, EN 15630-1, EN 15630-3 | EN ISO 6892-1, 7500-1 | ASTM A370, ASTM E8
It basically consists of:
– Strong loading frame with a reading cell built into the piston
– Hydraulic Servo-Plus Evolution Touch-Screen system (technical details: see p. 224; firmware details: see p. 18), for the data acquisition, control
and processing. The whole is built in a console.
The frame is designed to carry out tensile tests using the grips placed in the clamping heads. In the upper part, between the head and traverse,
it is possible to carry out flexion, compression, bending, hardness, dishing tests, according to the International Standards by using the suitable
(see accessories) devices. The hydraulic servocontrolled unit regulates the load rate by the Computer. An emergency device stops the machine
in any moment as per the International Safety Standards.
A control pedal situated on the frame governs the movement of the lower tensile head (excursion 0 to 580 mm with electric end of stroke
switches) for an easier positioning of the specimen according to its length. The machine is supplied complete with loading frame, control
console, while the software (mod. H009), extensometers (mod. H014 to H014-10) grips and the printer are options and must be ordered
separately according to the needs of the user.

ACCESSORIES FOR H003N
ROUND AND FLAT GRIPS. One set consists of two double pairs that
must be placed into the upper and lower tensile heads.
H003-03 Set of Grips for Flat specimens from 2 to 18 mm and
Round specimens Ø 5…12 mm
H003-04 Set of Grips for Flat specimens 18…36 mm
H003-07 Set of Grips for Round specimens from Ø 12…24 mm
H003-08 Set of Grips for Round specimens from Ø 25…40 mm

ACCESSORIES FOR TESTS ON METALS
H003-11
FLEXURE TEST
STANDARD: UNI 559
The equipment is composed by a couple of lower bearers with
adjustable supports and an upper blade.
Maximum load: 200 kN
Maximum distance between the lower bearers: 1000 mm
Width of the bearers: 120 mm
Diameter of the bearers: 50 mm
Weight: 70 kg approx.

H003-12
BENDING TEST
STANDARDS: UNI 564 | ASTM E290
The equipment is composed by a couple of lower bearers with
adjustable supports and an upper blade.
Maximum load: 200 kN
Maximum distance between the lower bearers: 1000 mm
Width of the bearers: 120 mm
Diameter of the bearers: 50 mm
Weight: 70 kg approx.
Note: bearers with different diameters are available on request.

H003-13
COMPRESSION TEST
STANDARD: UNI 558
The equipment is composed by an upper plate with seat ball
assembly and by a lower plate.
Maximum load: 600 kN
Diameter of the compression plates: 90 mm
Weight: 25 kg approx.

H003-14
TEST ON ELECTRO WELDED WIRE NETS
Device for the seizing of electro welded wire nets; this equipment
must be used with the grips for flat specimens.
Weight: 5 kg approx.
ACCESSORIES FOR TESTS ON CONCRETE

H003-21
COMPRESSION TEST on concrete cube specimens, max 150 mm
side.
The appliance is composed of:
An upper compression plate 287 mm diameter complete with seat
ball assembly. A lower compression plate 287 mm diameter
Maximum distance between the compression plates: 185 mm.
Weight: 60 kg approx.

H003-22
FLEXURE TEST on concrete beams with dimensions
100x100x400/500 mm and 150x150x600/750 mm
STANDARDS: EN 12390-5 / ASTM C78, C293
Composed by two lower and one upper bearers
Maximum load: 200 kN
Maximum distance between the lower bearers: 1000 mm.
Width of the bearers: 160 mm.
Weight: 40 kg approx.

 

 

Reviews

There are no reviews yet.

Be the first to review “H003N UNIVERSAL HYDRAULIC SERVO-CONTROLLED MACHINE 600 KN CAPACITY TO PERFORM STATIC TENSILE TESTS ON METALLIC MATERIALS.”

Your email address will not be published. Required fields are marked *