Menu Close

Shop

Explore your true style

FLEXURAL TESTING MACHINE 150 KN CAPACITY FOR FLEXURAL TESTS ON CONCRETE BEAM SPECIMENS MAX. DIMENSIONS 150X150X600 (750) MM

Category:

STANDARDS: EN 12390-5 | ASTM C78, C293 | AASHTO T97 | BS 1881:118 150 KN CAPACITY

MAIN FEATURES
Max. vertical daylight between upper/lower rollers: 160 mm
Rollers dimensions: Ø 40×160 mm
Complete with 4 adjustable and articulated rollers.
Distance of lower rollers adjustable from 100 to 455 mm
Distance of upper rollers adjustable from 40 to 155 mm
Gauge diameter 250 mm with 0.5 kN divisions.
Max. ram travel 50 mm approx.
Calibration accuracy: class 1.0
Hydraulic device to stop the piston stroke at its max
excursion, to avoid pumping the piston out of the cylinder.
Power supply (motorized models): 230V 1ph 50Hz 750W
Dimensions: 540x460x960 mm
Weight: 180…240 kg approx.

ACCESSORIES FOR 150 kN FLEXURAL MACHINES
C111-16 DISTANCE PIECE, 50 mm high to test beams
100x100x400/500 mm
C127N GRAPHIC PRINTER on thermo-paper on board for digital
models
C097-01
C115-01 TWO WAY HYDRAULIC VALVE, connected to the motorized
pumping unit of the machine to activate a second
frame. Technical details: see p. 318

C104-04 CONSOLE HOUSING THE SERVO-PLUS EVOLUTION, the
pump assembly is lined with sound-proofing material for
noise reduction and encased to enhance the design of
the machine. See p. 314
C097-01 DUAL LOW CAPACITY DIGITAL RANGE, complete with
appropriate pressure transducer, only for digital
machines. Range selectable from 10 kN to 100 kN.
Technical details: see p. 313
C097-05 CALIBRATION CLASS 1, starting from 1% of the full
range. With a special calibration procedure it is possible
to grant Class 1 practically on the full range of the
flexural machine. Applicable only on digital machines.

C100 SPLITTING TENSILE test device for cylinders.
EN 12390-6 | ASTM C496
Technical details and other
models: see p. 314

E170 COMPRESSION DEVICE to test mortar
specimens 40.1×40 mm
EN 196 | ASTM C349
Technical details and other models:
see p. 315
E172-01 FLEXURE DEVICE for mortar prisms 40.1x40x160 mm.
EN 196 / EN ISO 679 (it can be used only with the dual
low capacity digital range 0-15kN).
Technical details and other models: see p. 428
C126 BENCH to hold the compression
machine. See p. 317

 

 

Reviews

There are no reviews yet.

Be the first to review “FLEXURAL TESTING MACHINE 150 KN CAPACITY FOR FLEXURAL TESTS ON CONCRETE BEAM SPECIMENS MAX. DIMENSIONS 150X150X600 (750) MM”

Your email address will not be published. Required fields are marked *