Menu Close

Shop

Explore your true style

FLEXURAL FRAME, 200 KN CAPACITY HIGH STIFFNESS AND STABILITY FOR FLEXURAL TESTS ON CONCRETE BEAMS MAX. DIMENSIONS 150X150X600/750 MM, FLAT BLOCKS, FLAGSTONES, KERBS, TILES, SLABS, MASONRY UNITS, AND ANY TYPE OF MATERIAL HAVING MAX. WIDTH 600 MM AND MAX. HEIGHT 150 MM

Category:

STANDARDS: EN 12390-5 | EN 1340:4 | BS 1881:118, 6073-1, 7263 | ASTM C78, C293 | AASHTO T97  200 KN CAPACITY

MAIN FEATURES
High stiffness frame with minimum deflection at maximum
load (0.9 mm)
Max. vertical daylight between upper/lower rollers: 160 mm
Ram travel: 110 mm, to get minimun daylight of 50 mm
Horizontal daylight of the testing chamber: 720 mm
Simple action piston with counterweights to maximize
frictions
Power supply: 230V 1ph 50Hz 750W
Dimensions: 990x970x1105 mm
Weight: 190…250 kg approx.

ACCESSORIES FOR FLEXURAL 200 kN HIGH STIFFNESS
Rollers, Ø 40 mm, hardened and rectified, cadmium plated against
corrosion.
Lower rollers have adjustable distance from 75 to 900 mm, and
upper rollers have adjustable distance from 75 to 180 mm for two
points loading tests.
Possibility to easily place in the centre one upper roller for centre
point loading tests.
Models:
C090-12 ROLLERS GROUP upper and lower, 160 mm long.
C090-13 ROLLERS GROUP upper and lower, 613 mm long.
ACCESSORY FOR C090-13
C090-21 ROLLERS-HOLDERS (lowers only) 613 mm long, to be
installed on the C090-13 group in order to modify the
max. vertical daylight at 60 mm and min. at -50 mm to
test tiles, slabs etc. with max. thickness of 50 mm and
flexibility up to -45 mm
C090-14 ENERGY ABSORPTION TEST on sprayed concrete specimens.
STANDARDS: EN 14488-5 | UNI 10834
The test is performed with the specific equipment (square
base with useful size of 500×500 mm, loading element,
displacement transducer) described at p. 283 and the
Software/Firmware automatic system of load and displacement
Servo Strain (p. 282)
C111-17 DISTANCE PIECE 40 mm high, needed to perform the
deflection test to EN 14488-3
C090-15 DEFLECTION MEASUREMENT
TEST on fiber
reinforced concrete beams
100x100x400(500) mm and
150x150x500(600) mm
STANDARDS: EN 14488-3
ASTM C1609, C1018
The test is performed with
the specific equipment (deflection measurement device,
displacement transducers) described at p. 305 and
the Software/Firmware automatic system of load and
displacement Servo Strain (p. 282)

C091-13 UPPER TAMPER (steel made), for concrete KERBS tests.
The tamper is mounted on a rotating coupling and fixed to
the upper part of the machine to apply a flexural strength
on three points on the kerb, without any torsional stress.
STANDARD: EN 1340

C093-11 DEVICE for flexural tests on clay blocks for flooring.
STANDARDS: EN 15037 | UNI 9730-3

C127N GRAPHIC PRINTER on
thermo-paper on board for
digital models

C097-01 DUAL LOW CAPACITY
DIGITAL RANGE, complete
with appropriate pressure
transducer.
Range selectable from
10 kN to 100 kN.
Technical details:
see p. 313
C097-05 CALIBRATION CLASS 1, starting from 1% of the full
range. With a special calibration procedure it is possible
to grant Class 1 practically on the full range of the
flexural machine.

C100 SPLITTING TENSILE test device for cylinders.
EN 12390-6 | ASTM C496
Technical details and other
models: see p. 314
C103 SPLITTING TENSILE test
device for self blocking
pavers and cubes.
EN 1338, 12390-6.
Technical details: see p. 314

As alternative:
C103-02 SPLITTING TENSILE TEST
DEVICE for self blocking pavers
and cubes, max. dimensions 300×500 mm
EN 1338, 12390-6
Technical details: see p. 314

E170 COMPRESSION DEVICE to test
mortar specimens
40.1×40 mm
EN 196 | ASTM C349
Technical details and other
models: see p. 315

Reviews

There are no reviews yet.

Be the first to review “FLEXURAL FRAME, 200 KN CAPACITY HIGH STIFFNESS AND STABILITY FOR FLEXURAL TESTS ON CONCRETE BEAMS MAX. DIMENSIONS 150X150X600/750 MM, FLAT BLOCKS, FLAGSTONES, KERBS, TILES, SLABS, MASONRY UNITS, AND ANY TYPE OF MATERIAL HAVING MAX. WIDTH 600 MM AND MAX. HEIGHT 150 MM”

Your email address will not be published. Required fields are marked *